This bundle has been discontinued. You can still purchase the items individually though. Please see this similar product instead.A convenient bundle that includes (1) 2-Wire Motor 393 and (1) Motor Controller 29.
Features
Strong, steel internal gears
No clutches needed
Shaft coupler (included) replaces the clutch
2-Wire Motor Ports: Connect directly (Cortex only)
3-Wire Motor Ports: Use with the Motor Controller 29
Can be configured into a "high speed" version
Has 60% more torque than the 3-wire VEX Motor
The 2-Wire Motor 393 does not have an internal motor controller.
Compatibility
All VEX Microcontrollers (V0.5 requires use of a Motor Controller 29)
All VEX Square Shafts 0.125" (3.2mm)
2-Wire Motor Ports
3-Wire Motor Ports (with a Motor Controller 29)
Specs
Free Speed: 100 rpm (As Shipped)/160 rpm (High Speed Option)
Stall Torque: 13.5 in-lbs (As Shipped)/8.4 in-lbs (High Speed Option)
Stall Current: 3.6A
Free Current: 0.15A
All motor specifications are at 7.2 volts. Actual motor specifications are within 20% of the values above.
Motor Controller 29 Specs
Max motor stall current: 3 A
Max battery voltage: 8.5V (with fully charged 7.2V battery)
PWM Input: 1-2ms will give full reverse to full forward, 1.5ms is neutral, 200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your compiler
Input Cables: Black Wire - Ground, Orange Wire - Power, White Wire - PWM Signal
Output Cables: Red and Black Wires - Motor Connection
Kit Contents
(1) VEX 2-Wire Motor 393 Module
(1) VEX Motor Controller 29
(1) Inventor's Guide Insert
(2) 6-32 x 1/4" Screws
(2) 6-32 x 1/2" Screws
(1) Motor Coupler
(1) Motor Post