VEX-276-2193 VEX Motor Controller 29 <p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The VEX Motor Controller 29 uses a standard PWM signal (like that originating from the 3-wire ports on VEX Microcontrollers) to drive a VEX 2-Wire Motor. This Motor Controller will allow you to use VEXplorer Motors with the VEX System. </font></p>
<p> <font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Each VEX Motor Controller can drive one 2-Wire Motor</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Motor Controller 29 Specs</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Max motor stall current: 3 A<br />
Max battery voltage: 8.5V (with fully charged 7.2V battery)<br />
PWM Input: 1-2ms will give full reverse to full forward, 1.5ms is neutral, 200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your compiler<br />
Input Cables: Black Wire - Ground, Orange Wire - Power, White Wire - PWM Signal<br />
Output Cables: Red and Black Wires - Motor Connection </font></p>
<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Note: We recommend using no more more than one (1) 3-Wire extension cable in between the Motor Controller 29 and a VEX Microcontroller. For longer extensions, use 2-Wire extension cables in between the Motor Controller 29 and a VEX 2-Wire motor.</font></p>