VEX-276-1667 VEX Robotics 2-Wire Motor 269 with Motor Controller 29 <p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">A convenient bundle that includes (1) 2-Wire Motor 269 and (1) Motor Controller 29. Add motors to power more wheels or add an end effector to take your robot to the next level.</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Features</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Strong, steel internal gears<br />
No clutches needed<br />
Shaft coupler (included) replaces the clutch<br />
2-Wire Motor Ports: Connect directly (Cortex only)<br />
3-Wire Motor Ports: Use with the Motor Controller 29<br />
Similar torque and speed to the 3-wire VEX Motor</font></p>
<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The 2-Wire Motor 269 does not have an internal motor controller.</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Compatiblity</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
All VEX Microcontrollers (V0.5 requires use of a Motor Controller 29)<br />
All VEX Square Shafts 0.125" (3.2mm)<br />
2-Wire Motor Ports<br />
3-Wire Motor Ports (with a Motor Controller 29)</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Motor Specs</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Free Speed: 100 rpm<br />
Stall Torque: 8.6 in-lbs<br />
Stall Current: 2.6A<br />
Free Current: 0.18A<br />
<br />
All motor specifications are at 7.2 volts. Actual motor specifications are within 20% of the values above.</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Motor Controller 29 Specs</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Max motor stall current: 3 A<br />
Max battery voltage: 8.5V (with fully charged 7.2V battery)<br />
PWM Input: 1-2ms will give full reverse to full forward, 1.5ms is neutral, 200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your compiler<br />
Input Cables: Black Wire - Ground, Orange Wire - Power, White Wire - PWM Signal<br />
Output Cables: Red and Black Wires - Motor Connection </font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Kit Contents</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
<a href="VEX-276-2181.html">(1) VEX 2-Wire Motor 269 Module</a><br />
<a href="VEX-276-2193.html">(1) VEX Motor Controller 29</a><br />
(1) Inventor's Guide Insert<br />
(2) 6-32 x 1/4" Screws<br />
(2) 6-32 x 1/2" Screws<br />
(1) Motor Coupler<br />
(1) Motor Post
</font></p>

VEX Robotics 2-Wire Motor 269 with Motor Controller 29
A convenient bundle that includes (1) 2-Wire Motor 269 and (1) Motor Controller 29.

$21.99
Robot MarketPlace - VEX Robotics 2-Wire Motor 269 with Motor Controller 29
CLOSE X
Loading Image...

Robot Kits
    VEX Motion


Click photo to enlarge.

VEX Robotics 2-Wire Motor 269 with Motor Controller 29
Part# VEX-276-1667


No reviews yet.

$21.99
This Product Has Been Discontinued
Stock Status: Removed
 

 

 

General Product Information
Alternate Photos
Other Documentation
Reviews & Comments

A convenient bundle that includes (1) 2-Wire Motor 269 and (1) Motor Controller 29. Add motors to power more wheels or add an end effector to take your robot to the next level.

Features
Strong, steel internal gears
No clutches needed
Shaft coupler (included) replaces the clutch
2-Wire Motor Ports: Connect directly (Cortex only)
3-Wire Motor Ports: Use with the Motor Controller 29
Similar torque and speed to the 3-wire VEX Motor

The 2-Wire Motor 269 does not have an internal motor controller.

Compatiblity
All VEX Microcontrollers (V0.5 requires use of a Motor Controller 29)
All VEX Square Shafts 0.125" (3.2mm)
2-Wire Motor Ports
3-Wire Motor Ports (with a Motor Controller 29)

Motor Specs
Free Speed: 100 rpm
Stall Torque: 8.6 in-lbs
Stall Current: 2.6A
Free Current: 0.18A

All motor specifications are at 7.2 volts. Actual motor specifications are within 20% of the values above.

Motor Controller 29 Specs
Max motor stall current: 3 A
Max battery voltage: 8.5V (with fully charged 7.2V battery)
PWM Input: 1-2ms will give full reverse to full forward, 1.5ms is neutral, 200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your compiler
Input Cables: Black Wire - Ground, Orange Wire - Power, White Wire - PWM Signal
Output Cables: Red and Black Wires - Motor Connection

Kit Contents
(1) VEX 2-Wire Motor 269 Module
(1) VEX Motor Controller 29
(1) Inventor's Guide Insert
(2) 6-32 x 1/4" Screws
(2) 6-32 x 1/2" Screws
(1) Motor Coupler
(1) Motor Post