|
PowerPole
TriCrimp Crimping Tool
Finally!
An inexpensive crimping tool especially designed for use with
the PowerPole 15, 30 and 45 Amp contacts!
Simply
push your contact into the designated 15, 30 or 45 slot, put your
stripped wire in, and squeeze! Couldn't be any easier. Get perfect
crimps every time.
About
9.5 inches long.
View
closer view of crimp area:  |
|
|
Crimping
Tool
An
inexpensive tool for crimping many of the connectors you can
find on this web site, including the 15, 30, 50 and 75 Amp PowerPole
connectors.
This
crimping tool is made from drop-forged steel and has several different
crimping dies. 8" long.
|
|
|
E-Flite
Miniature Gear Puller
A
great, safe way to remove small pinion gears from 1mm to 5mm
shafts. Simply position the puller over the gear, and turn the
knob, your gear will slowly and powerfully be pulled off the
shaft with no damage to gear, motor or shaft.
Never
hammer or use a pliers to pull a pinion gear!
Easy
to use and very reliable. |
|
|
T-HANDLE
ALLEN WRENCHES
Metal
stand included for easy storage and access. Choose SAE
or metric set. Provides the leverage needed to loosen
and tighten hex head fasteners without stripping the
head. Contoured plastic T-handles are stamped with hex
key size for instant identification. Chrome-vanadium
steel shank. SAE 10-pc set includes sizes 3/32", 7/64",
1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
Metric 10-pc set includes sizes 2, 2.5, 3, 4, 4.5, 5,
5.5, 6, 8, 10mm. |
|
|
|
FOLDING
HEX AND TORX KEY TOOL
The most commonly
used hex and Torx sizes (5/32", 3/16", 1/4", 5/16",
T25, T27, T40) housed in a tough composite handle with a rubber
grip Keys can be used at a right angle, straight out or at any
angle in between to reach to hard-to-get-at fasteners |
|
|
Twist
Drill Bit Sets
Save
20%! 29-pc. (standard or 3/8" turned-down shank) Jobber's
length bits are roll-forged of highest-quality M2 high-speed
steel to meet rigid engineering standards. Black oxide finish
for long dependable bit life. 29-pc. bit set (standard or 3/8" turned-down
shank). Quantity is limited. Not all styles, sizes or colors
shown may be available. |
|
|
Titanium
M2 High-Speed Steel Drill Bit Sets
Choose
29-pc. or 13-pc. set. Meet rigid engineering standards. Industrial-quality
roll-forged M2 high-speed steel bits are titanium coated to 102
Rockwell hardness (that's 56% higher than uncoated bits). Last
4 to 5 times longer and cut through harder alloy steels than
standard M2 high-speed steel bits without titanium coating. Also
withstand higher heats (up to 1,200ï¿1⁄2 F)
and require less sharpening. Jobber's length bits have beautiful
gold color and store neatly in the indexed box. Select 29-pc.
or 13-pc. set |
|
|
115-PC.
HIGH-SPEED DRILL BIT SET
Set
includes 60 wire gauge bits (numbered 1 through 60), 26 lettered
bits (A through Z) and 29 fractional bits (1/16" through
1/2" in 1/64"
increments). Lettered bits W through Z must be used with 1/2" drill
chuck (not included). Bits are neatly organized in an enameled
steel case measuring approx. 14" x 4-1/4" x 2-1/2".
Case features heavy-duty steel latch plus 3 separate hinged indexed
sections with bit sizes clearly marked to help you find the bit
you want instantly. |
|
|
115-PC
TITANIUM HIGH-SPEED DRILL BIT SET
Industrial-quality
roll-forged M2 high speed steel bits are titanium coated to 102
Rockwell hardness—that's 56% harder than uncoated bits!
Cut through hard alloy steels and last 4 to 5 times longer than
standard uncoated bits. Withstand heats up to 1200° F. Require
minimal sharpening. Set includes 60 wire gauge bits (numbered
1 through 60), 26 lettered bits (A through Z) and 29 fractional
bits (1/16" through 1/2" in 1/64"
increments). Lettered bits W through Z for 1/2" drill chuck
only (not included). Range in length from approx. 1-5/8" to
6". Neatly organized in an enameled steel case measuring approx.
14" x 4-1/4"
x 2-1/2". Case features heavy-duty steel latch plus 3 separate
hinged indexed sections with clearly marked bit sizes. |
|
|
8-PC.
LARGE DRILL BIT SET
Black
oxide finish for long, dependable bit life.
Highest quality M2 high-speed steel.
1/2" turned-down shanks. Sizes: 9/16" to 1" in 1/16"
increments. |
|
|
AUTOMATIC
CENTER PUNCH
No
hammer needed—automatically strikes a sharp blow when you
press down on punch. Adjustable knurled cap regulates force of
blow. Use for marking, punching, riveting, or making a hole or
indentation to prevent drill bits' wandering. Brass body with
heat-treated alloy steel point. 5" L x 1/2" diam. |
|
|
STEEL
STAMP SET
Super-sharp
steel characters make clean, permanent impressions on metal,
plastic, wood, leather, almost any material.
Great
for marking all those parts of your bot as you disassemble, helps
keep everything in order as you reassemble. |
|
|
40-PC.
TUNGSTEN AND CARBON STEEL HEX-SHAPED TAP AND DIE SET
Industrial-quality,
heat-treated and hardened tungsten and carbon steel taps and
dies provide straight, clean, easy threading. Set includes 17
sq. dr. taps and 17 hex-shaped dies (approx. 1" diam.) all
with marked sizes, double-handle adjustable tap vise, double-handle
adjustable die holder, adjustable tap T-handle, pitch gauge,
screwdriver and molded plastic case. |
|
|
ELECTRONIC
CALIPER
Super-precise,
large, easy-to-read LCD digital display of inside and outside
depth and step measurements. Data output socket allows use with
your computer. Display flashes to indicate low battery. Thumb
control for smooth adjustments, locking screw for repetitive
readings. Zero reset button makes it easier to measure variances—lets
you set zero at any position within measuring range. Carry case
and instructions included. |
|
|
LOCKING
C-CLAMP PLIERS
Holds
your bot parts securely—yet releases easily. Great for
clamping while welding or tapping. Set includes 3 drop-forged
hardened-steel pliers: 6" (2" opening, 1-1/2" throat
depth); 11" (3-3/4"
opening, 3" throat depth); 18" (4-1/4" opening,
10"
throat depth). |
|
|
HEAVY
DUTY C-CLAMPS
Heavy-duty
malleable steel frames with chrome-plated alloy steel screw shafts,
swivel pads and sliding T-handles. Sizes denotes clamp openings |
|
|
SOCKETS,
RACHETS & EXTENSIONS
Check
this page for a wide selection of different socket sets, rachets
and extensions. |
|
|
WRENCHES
Practically
any kind of wrench you could ever need. |
|