Robot MarketPlace - VEX Protobot Dual Control Starter Bundle with PIC

VEX Protobot Dual Control Starter Bundle with PIC
Build a robot which can be controlled by a human operator or run autonomously, with the PIC Micro Controller.

$419.99

The Protobot Robot Kit provides the perfect foundation for any Robotics experience. Follow step-by-step instructions to build the VEX Protobot or VEX Tumbler, or use the 300+ included parts to design your own VEX Robotic creations.

The VEX Protobot Robot Kit serves as the core around which the Vex Robot Starter Bundles are based. Bundles offer the best way to buy a complete robot package while saving you money because they combine the required control systems with the Protobot Robot Kit at a discount. When combined with one of the control system options you can create a radio control, programmable autonomous or dual control robot. This kit contains over 300 parts, pieces and detailed assembly instructions in the form of a Quick Start Guide to build the VEX Protobot Robot, the VEX Tumbler Robot, or some creation of your own design!

These Starter Bundles include the basic PIC Micro Controller. The PIC Micro Controller has 8 motor outputs, 16 inputs and outputs and can utilize our 75 MHz Transmitter and Receiver.

NOTE: Programming software is sold separately.

This kit includes:
Protobot Robot Kit
PIC Micro Controller
Transmitter and Receiver Kit
Limit Switch Kit
Bumper Switch Kit

Technical Info
Drive Base Width	12.375in
Drive Base Length	9.125in
Arm Length	17in (arm down, pointing forward off the front of the bot)
Arm Height	8in (arm down, pointing forward off the front of the bot) 17.75in (arm all the way up)

Protobot Kit Contents
Quantity	Description
4	Motor Module w/ Clutch Assembly
54	Screw, 8-32 x 1/4in long
15	Screw, 8-32 x 3/8in long
12	Screw, 8-32 x 1/2in long
2	Screw, 8-32 x 3/4in long
10	Screw, 6-32 x 1/4in long
8	Screw, 6-32 x 1/2in long
34	Nut, 8-32 Keps
21	Shaft Collar
4	Shaft, 2in long
6	Shaft, 3in long
4	Standoff, 3in long
4	Standoff, 2in long
6	Standoff, 1in long
4	Standoff, 1/2in long
1	Tool, Allen Wrench Small (5/64in)
1	Tool, Allen Wrench Large (3/32in)
1	Tool, Vex Open-Ended Wrench
20	Bearing Flat
12	Shaft Spacer, Thin (4.6mm)
2	Shaft Spacer, Thick (8mm)
2	Bar, 25-hole
1	Plate, 5 x 15 hole
2	Chassis Bumper (15-hole)
4	Chassis Rail (16-hole)
100	Zip Tie, 4in long
1	Tool, Nut Starter
1	Vex Battery Holder (7.2V - AA 6x)
4	Gear, 12-tooth
4	Gear, 36-tooth
6	Gear, 60-tooth
4	Large Vex Wheel (5in diameter)
4	Medium Vex Wheel (4in diameter)
4	Small Vex Wheel (2.75in diameter)
2	Gear, 84-tooth
1	Cable, PWM Extension, 12in
1	Shaft, 4in long
2	C-Channel 1x2x1x15 hole
1	C-Channel 1x2x1x25 hole
50	Bearing Pop-Rivet
3	Motor Clutch Assembly
1	Manual, Protobot and Tumbler