Robot MarketPlace - VEX Robotics Design Starter Kit

Create and construct your very own radio-controlled robot! This starter kit contains everything you need to design a robot that lifts, throws and races. Over 500 included parts-three variable-speed motors, programmable microcontroller, multiple gears, various wheel types, configurable chassis and much more! The creative possibilities are endless! Vex Robotics Design system was inspired by the FIRST (For Inspiration and Recognition of Science and Technology) Robotics Competition-the world's leading high school robotics program. This not-for-profit organization was founded to inspire young people's interest and participation in science and technology.

Features
- Customize your own robot-unlimited design possibilities with instructions for three configurations
- Kit lets you design robots with many different functions-4-wheel robots, crawlers, etc.
- Remote control with alternate frequencies lets you operate multiple robots at the same time
- Detailed user guide gives you step-by-step instructions to ensure successful creation

What's in the box
Over 500 parts, including three variable-speed motors, programmable microcontroller, multiple gears, various wheel types, configurable chassis and much more! See a full itemized list of all 500+ parts below

Quantity	Description
1	Vex Robotics Transmitter with Channel 61 TX module (75.410 MHz )
1	Vex Micro Controller (the "brains" of the system)
1	Vex Micro Controller Battery Pack (requires 6 AA batteries, not included)
1	Vex Servo
3	Vex Motors
1	Inventor's Guide Notebook with Inserts
1	Vex RF Receiver Module with Channel 61 RX Crystal (75.410 MHz)
1	Vex Receiver Antenna Sleeve and Sleeve Holder
1	Nut Starter
2	Vex Limit Switches
2	Vex Bumper Switches
1	3 Wire (Black, Orange, White) Extension Cables
1	Interconnect Cable - connects the Receiver to Vex Micro Controller
2	Knobby Wheels
5	Vex Jumpers
16	Delrin Bearings
65	Keps Nuts
2	Intake Rollers
2	All Purpose Wheels
4	Vex Angle with holes and slots (5/8 x 5/8 x 15 in.)
20	Large Black Spacers
16	Collars with screws
14	Nylock Nuts
4	Low Friction Wheels with removable tires
2	Flat Plates, 5 x 15 hole (2.5 x 7.5 in.)
4	Flat Bars, 25 hole (1/2 x 12 in.)
2	Drive Shaft Bars (12 in.)
20	Small Black Spacers
30	Metal Washers
1	Pack of replacement gears, internal gears for the motor and servo
10	Nylon Washers
6	Bearing Blocks
4	Shaft Lock Bars
4	60 Tooth Gears
4	36 Tooth Gears
4	12 Tootth Gears
2	Angle Gussets
4	Chassis Rails (15/16 x 1/2 x 8 in.)
2	Chassi Angles (1 x 1 x 7.5 in.)
1	Pack of 4 inch tie wraps
70	1/4" 8-32 Screws
28	3/8" 8-32 Screws
28	1/2" 8-32 Screws
14	3/4" 8-32 Screws
10	1/2" 6-32 Screws
10	1/4" 6-32 Screws
4	Stub Shafts, attach clutch to motor
4	3 inch Threaded Beam, 8-32 threaded female-female standoff
4	2 inch Threaded Beam, 8-32 threaded female-female standoff
8	1 inch Threaded Beam, 8-32 threaded female-female standoff
10	1/2 inch Threaded Beam, 8-32 threaded female-female standoff
2	Pivot Gussets
2	Plus Gussets
4	3 inch Drive Shafts
4	2 inch Drive Shafts
1	Wrench
2	Allen Wrenchs, 3/32 and 5/64