Robot MarketPlace - Original Dustin Motor 1-High Torque

We start with the powerful DeWalt 24V Hammerdrill motor and it's well-engineered transmission, then modify and rebuild it for robotic combat.

Specifications:

3 Pounds, 6 oz.
7.88" L x 4.5" W x 3.00" H (with mounts)
Can be run at 24 or 36V
Reversible, Neutral Timed
No shaft is included, uses a 1/2" shaft with two flats.

The first 1.25" of the shaft will be inside the front of this motor, so you might want to obtain a slightly longer shaft than usual.

24 Volt, High Torque
36 Volt, High Torque

Gear Ratio 50.4 : 1 50.4 : 1

No load RPM 450 RPM 675 RPM

Stall Current 120 Amps 180 Amps

Stall Torque 550 in-lb 825 in-lb

Horsepower .98 HP 2.21 HP

Click here to add your own review or comment for this product.

4/29/2010

Admin

Not for Superheavyweights

This motor is NOT recommended for use in robots more than 120 pounds. The previous poster used them in a 340 lb robot, which is WAY over the limits. Any time you have a concern about if a motor is enough for your robot, PLEASE contact us before purchasing!

4/26/2010

U_of_Akron

not worth the money

This motor is not recommended for any thing ovor 20lbs for robotics. These are also not the motors that you can over volt too. They are not designed well enough for this to work. Get mag motors and save your money.

5/14/2009

Matt Tavares (Blender)

Blender Tested and Not approved

We used 4 of these the first year for the Blenders drive and they would work great until they didn't anymore. We smoked more of these that year than I care to mention. That was our rookie year and we probably should have used them in low gear instead of high but regardless I haven't trusted them since then.