Pro
120 Mark 2 is built on the success of the Pro controller. The circuits
of these are so well proven and successful that no major design
was possible, but the board has been re-laid using sub-miniature
resistors to give room for more features.
The
Pro includes a reverse polarity protection relay. The connections are
all arranged at one end of the board for ease of access once the controller
is boxed. The Pro-120 is a full featured, Four Quadrant (acceleration
and regenerative braking, forward and reverse) motor speed controller
principally for 12v, 24v and 36v battery operation, but a 48v version
is also available. Although it is similar in size to other industry
standard 110 amp controllers, the power performance is considerably
enhanced with no loss of reliability.
Two
controllers can be coupled so two motors work as one, but with independent
current limiting, giving control of currents up to 240 amps.
For
complete specifications, please download the 'Details' PDF and/or
Owners Manuals. For information on the interface you will need
to control this ESC, click here.
Output
Current |
155
Amps |
Intermittent |
115 Amps |
for 1 minute |
30 Amps |
continuous |
Size |
6.3 x 4.0
x 1.57" |
All PRO 120
series |
Weight |
11.36 oz (0.71
lb) |
All PRO 120
series |