0-PL994 298:1 Micro Geared Motor HP <p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 298:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). These tiny, high-quality motors are intended for use at 6V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. </font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Specs</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Gear ratio: 298:1<br />
Free-run speed @ 6V: 100 rpm<br />
Free-run current @ 6V: 70 mA<br />
Stall current @ 6V: 1600 mA<br />
Stall torque @ 6V: 70 oz-in<br />
Extended motor shaft?: No<br />
Size: 24 x 10 x 12 mm<br />
Weight: 0.34 oz<br />
Shaft diameter: 3 mm</font></p>