0-GPMM3015 PolyCharge4 DC 4 Output 1-4 Cell LiPo Charger <p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif"><div id="wrap"><div id="video1">
<a rel="#voverlay" href="http://www.youtube.com/embed/O6AIaQAQlgc?autoplay=1&rel=0" title="ElectriFly PolyCharge4 - The Hobby MarketPlace"><img src="http://www.robotcombat.com/products/videos/data/thumbnails/0-GPMM3015.jpg" alt="ElectriFly PolyCharge4 - The Hobby MarketPlace" /></a></div></div>
Features</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
Four outputs independently Charge 1-4 cell Lithium Polymer batteries<br>
Automatically detects number of cells on each output-no switch to set "Constant Current/Constant Voltage" Charge method<br>
Each output features push-button START/STOP control, three-hour safety timer and dial to set battery capacity from 300mAh-3000mAh<br>
Audio and tri-color LEDs provide warnings for improper input voltage and output reverse polarity<br>
Built-in cooling fan<br>
Reverse polarity and current overload protection on input</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Specs </font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
Input Voltage: 12-15V DC <br>
Number of Outputs: 4 <br>
Input Connectors: Alligator clips, hard-wired directly to charger <br>
Case Size: 8.2" x 1.5" x 5" (208x38x126mm) Weight: 21.8oz (617g)<br>
Battery Type: 1-4 (3.7-14.8V) Lithium Polymer cells only <br>
Charge Control: Push-button <br>
Charge Termination: "Constant Current/Constant Voltage" <br>
Battery Capacity Range: 300-3000mAh (for batteries larger than 3000mAh, full Charge time will exceed one hour) <br>
Fast Charge Current: 300mA-3.0A <br>
Status Indicators: Tri-colored LED and audible buzzer <br>
Charge Output Jacks: Banana jacks <br>
Safety Timer: 3-hour maximum Charge time <br>
Fuse: 20A replaceable auto type spade fuse </font></p>
<p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Note: This charger requires either an external 12VDC <a href="power_supplies.html" target="_top">Power Supply</a> or Battery, it does NOT plug in to 110V AC power</font></p>
NOTE: The instructions for the ElectriFly PolyCharge4 charger state the built-in fan turns ON when a load is present on any of the four outputs. This is incorrect. The fan turns ON any time input power is applied to the charger. We regret this error.