This has been a favorite of R/C modelers for years -- and now the F4U Corsair is available as an easy-going, Almost-Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field!
Features
Construction: Lightweight painted foam with details such as molded panel lines and surface details
Wing: One-piece, detaches for easy transport
Canopy: Clear with painted panel lines
Motor: 280 size ball bearing with pre-assembled gearbox
Propeller: 10x7 composite plastic
Radio Compartment: Accessible in front of canopy
Building Time: Ready to fly in 4-5 hours
Included in the Box
Pre-built wing, fuselage and tail sections
280 size motor
Gearbox
WWII decals
10x7 propeller
Hardware and instruction manual
Plastic molded-in radial engine replica
| Specs |
| Wingspan |
32.5in. |
| Wing Area |
224 sq. in. |
| Weight |
14-16oz. |
| Wing Loading |
9-10oz. |
| Length |
27in. |
| Center of Gravity |
2in. back from leading edge of wing at the fuselage |
| Control Throws |
Low Rate |
High Rate |
| Elevator |
3/16in. up and down |
3/8in. up and down |
| Aileron |
1/4in. up; 1/8in. down |
3/8in. up; 5/16in. down |
Needed to Complete
3-channel Radio
Two micro servos
Electronic Speed Control
Battery: 650mAh 8S NiMH OR 1500mAh 7.4V LiPo
Compatible Battery Charger
Building and Field Equipment: Foam safe CA, epoxy and tools