0-FSAFE1 Air Guard Micro Failsafe Module <p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">A
programmable fail-safe unit, designed to return the signal from your
receiver (running to your servo, speed controller, etc), back to
a pre-defined brake position in the event of a signal loss to your
receiver, or when the receiver's input voltage drops below 4.0 volts.</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">A
failsafe is critical in all combat robots, and is required for nearly
all competitions. If your radio/receiver or speed controllers are
not capable of a programmable failsafe position, you will need one
of these for each of your receiver's outputs that you are using for
a motion device.</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">This
unit is very simple to hook up inline from your receiver to your
speed controller/servo, and is easy to program with the touch of
a button. The Air Guard Micro Failsafe has a status LED. A solid green
LED means normal operation. A solid orange LED means brake position
set. Solid red LED means signal loss, and failsafe engaged. Flashing
LED between red &amp; orange means low battery voltage.</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Compact
- only 0.75&quot; x 0.5&quot; x 0.27&quot;<br>
Lightweight - only 0.13 oz (3.9 grams)<br>
Operating Voltage - 4.0V - 8.0V </font></p>

Air Guard Micro Failsafe Module
A programmable fail-safe unit, designed to return the signal from your receiver (running to your servo, speed controller, etc), back to a pre-defined brake position in the event of a signal loss to your receiver, or when the receiver's input voltage drops below 4.0 volts.

$24.99
Robot MarketPlace - Air Guard Micro Failsafe Module

RC Gear
    RC Accessories - General


Click photo to enlarge.

Air Guard Micro Failsafe Module
Part# 0-FSAFE1




Please see this product on the new Robot MarketPlace web site. Click here

 
 

 

 

 



 


This page was made with 4W WebMerge