Robot MarketPlace - E-flite UMX Extra 300 3D BNF

UMX Extra 300 3D - The Robot MarketPlace

The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible.

The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film. The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision. Optional Side Force Generators are also included. These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight. They improve tracking during precision aerobatics too.

The UMX Extra 300 3D BNF comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum AR6400L Ultra Micro DSM2 Receiver/ESC installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included. For best performance, a DSM2 aircraft transmitter with dual rates and expo is recommended.

Features
An ultra micro that's ideal for indoor 3D flight
Completely built and flight ready--just bind to any DSM2 aircraft transmitter with dual rates and expo
Includes a Li-Po flight battery and DC Li-Po charger
Small and light enough for experienced pilots to fly almost anywhere indoors

Specs
Scale	Ultra Micro
Wingspan	16.8 in. (427mm)
Overall Length	19.4 in. (494mm)
Wing Area	74 sq. in. (4.8 sq. dm)
Flying Weight	1.2 oz (32.5g)
Motor Size	8.5mm Coreless Brushed
Trim Scheme Colors	Red, Grey, Clear, Black
Prop Size	130x70mm
Recommended Battery	3.7V 1-cell 150mAh LiPo (included)
Approximate Flying Duration	4-8 minutes
Recommended Environment	Indoors

Needed to Complete
A 4+ Channel DSM2 compatible Transmitter. A programmable transmitter capable of dual rates and exponential is highly recommended.