Robot MarketPlace - E-flite Mini Funtana X ARF

E-flite Mini Funtana X ARF
The Mini Funtana X features light wing loading through increased wing area, resulting in an airplane that excels in high-alpha and all-around maneuverability.

$144.99

The Mini Funtana X™ is another in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.

To create the new Mini Funtana X ARF, E-flite began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted with an E-flite® Park 480 brushless outrunner, the Mini Funtana X is capable of superb vertical performance.

Features
Tapered thickness airfoil for improved aerodynamic performance
Optional Side Force Generators (SFG's) included
Designed for use with E-flite�s Park 480 Brushless Outrunner Motor
Balsa/lightweight plywood construction covered in genuine UltraCote�
Wing fillets
Aluminum landing gear and steerable tail wheel
Easy-access magnetic battery hatch
Factory-painted fiberglass cowl and wheel pants
Assembles in just a few evenings
Generous wing area for lighter wing loading�26% larger than original Mini Funtana
Large control surfaces for precise control in high-alpha flight

Wingspan:	43 in (1092mm)
Overall Length:	40.5 in (1028mm)
Wing Area:	447 sq in (28.8 sq dm)
Flying Weight:	27–29 oz (765–822 g)
Motor Size:	Park 480 BL outrunner
Radio:	6-channel Tx and micro Rx
Servos:	4 sub-micro
Trim Scheme Colors:	True Red (HANU866), White (HANU870), Deep Blue (HANU873), Silver (HANU881)
CG (center of gravity):	3.75 in (95mm) behind the leading edge
Prop Size:	12x6 electric
Hardware Included:	Yes
Speed Control :	40A brushless
Recommended Battery:	11.1V 3-cell 2100mAh LiPo
Control Throw (Ailerons):	Low 1" (25mm) Up/Down or High 1 7/8" (48mm) Up/Down
Control Throw (Elevator):	Low 3/4" (19mm) Up/Down or High 2 5/16" (58mm) Up/Down
Control Throw (Rudder):	Low 1 3/4" (45mm) Left/Right or High 2 3/4" (70mm) Left/Right
Approx. Assembly Time:	4 hours

Needed to Complete
6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
40A brushless ESC
12x6 electric prop
Battery & charger