Robot MarketPlace - E-flite Carbon-Z Yak-54 PNP

E-flite Carbon-Z Yak-54 PNP
The Carbon-Z Yak 54 PNP is perfect for the intermediate to advanced skilled 3D flyer that is looking for a superior performing plane.

$274.99

The Carbon-Z™ Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with the phenomenal brushless Q-Power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits.

Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a full range aircraft transmitter and receiver, a 4S 14.8V 2800mAh Li-Po battery, and a 4S Li-Po charger. To get the most from the Carbon-Z Yak 54, a programmable aircraft transmitter with dual rates and exponential function is recommended.

Features
Exceptionally strong and lightweight Carbon-Z airframe
High-output 25-size brushless power system installed
E-flite 60A Pro brushless ESC installed
Digital high-speed metal gear servos installed
High-performance prop optimized for precision and 3D flying
Low friction carbon rod hinges
Replaceable wings, stab, landing gear and control surfaces
Quickly disassembles for transport or storage in this box
Requires a full range aircraft transmitter, receiver, battery and charger (sold separately)

Wingspan:	48.0 in (1220mm)
Overall Length:	48.5 in (1230mm)
Wing Area:	525 sq in (34.0 sq dm)
Flying Weight:	3.75-3.80 lbs (1.70-1.73kg)
Motor Size:	25-size 1,000Kv Brushless Outrunner (included)
Radio:	6+ Channel Transmitter and Receiver
Trim Scheme Colors:	Red Pantone 185C, Blue Pantone 286C
CG (center of gravity):	At wing tip, 6 inches (153mm) forward from the aileron trailing edge
Wing Loading:	16.2 oz/sq foot (50.14 grams/sq dm)
Prop Size:	12 x 5.25 (305 x 133mm) (included)
Spinner Size:	1.57 in (40mm)
Speed Control :	60-Amp Pro Switch-Mode BEC Brushless (included)
Recommended Battery:	2,800mAh 4S 14.8V LiPo
Flaps:	No
Retracts:	No
Control Throw (Ailerons):	Low: 30mm, High: 65-70mm up/down at aileron root
Control Throw (Elevator):	Low: 15mm, High: 48-50mm up/down at counter balance leading edge
Control Throw (Rudder):	Low: 45mm, High: 65mm right/left at counter balance leading edge
Approx. Flying Duration:	5 minutes
Minimum Age Recommendation:	14 years
Experience Level:	Intermediate
Recommended Environment:	Outdoor
Assembly Time:	Less than 1 Hour
Is Assembly Required:	Yes

Needed to Complete
A full range aircraft transmitter (with programming capabilities highly recommended)
Compatible full range receiver
4S 14.8V LiPo Battery (2800mAh+) and compatible charger