Robot MarketPlace - Mamba Max Pro One Cell 1/10 Brushless ESC

Mamba Max Pro has taken the racing world by storm. Advanced adaptable timing features and CHEAT mode give racers a clear edge at a Castle price point. One cell class racers were feeling neglected, and we simply couldnÕt have that.

Here's the answer. The new Mamba Max Pro One Cell Special Edition. They come factory-built to operate on the input of 1-6 Lipo cells, so the single cell classes are covered. WeÕve also taken the fans off so users have an easier time squeezing them into tight confines.

These controllers will have their BEC circuit disabled - removed actually - so you will need an outboard 4.8 - 6.0 volt power source to run your electronics. We recommend a CC BEC with a small 2s LiPo or a separate 4/5 cell NiMH receiver pack.

They are still good to 6S max, and you get to use all of the advanced Smart Senseª and CHEAT mode settings. We hear these are the fastest controllers on the market, act now to make sure that you have one by the beginning of 2010.

Castle Link compatible - driver preferences in throttle curve, brake strength, reversing modes and more. Sensored and sensorless motor operating modes. Designed specifically for 1/10 scale one-cell class carpet racing.

Specs
Cells:	1-6s LiPo
Brake:	Proportional with adjustable curve
Reversible:	Yes, multiple options
Low Voltage Cutoff:	Programmable
BEC:	None
Cooling Fan:	None
Size:	L: 1.79" (45.5mm) W: 1.44"(36.5mm) H: 0.85" (21.5mm)
Weight w/wires:	81g (2.8 oz)
Connector:	Solder Posts