Stock Status: Available   

These are custom-designed mounts for both the A28-150 or the A28-400 Ampflow motor.

The addition of the cooling fins helps dissipate the heat that this motor can produce, allowing your motor to run more efficiently.

Constructed using 1/2" thick 6061-T6 aluminum. All mounts come with two holes in the base for 1/4" screws, and two bolts are included to attach the top half of the mount around your motor- couldn't be more simple to install.

There are no other mounts made for this motor that are specifically-designed for fast swap-out. Nothing worse that having to break down your entire robot just to get a motor out, especially during a frantic competition. With these mounts, 2 bolts from the top of each mount, and you can lift the motor right out.

Weight: 8.64oz

NOTE: This motor mount is designed to EXCLUSIVELY fit Ampflow motors(A28-400 or A28-15) ONLY, which have a inner can diameter of 2.75 inches. This mount WILL NOT FIT a 3" diameter motor can. It also WILL NOT FIT the F30-400, F30-150, E30-400 or E30-150 Ampflow motors, which have a 3.1" diameter.

Mounts are sold individually, you may want to use two per motor.