Spektrum DX6i 6-channel 2.4GHz DSMX Radio Transmitter Only Mode 1
Part# 0-SPMR66101

Stock Status: Removed

Retail: $199.99

Our Price:

$159.99


This Product Has Been Discontinued

This product has been discontinued. Please see this similar product instead.

Spektrum Binding Process - The Robot MarketPlace
The Spektrum DX6i does away with all that 72Mhz/75Mhz mess and moves on to a whole NEW band- 2.4GHz! This Digital Spread Spectrum radio system is the biggest breakthrough in R/C technology since digital proportional control.

This is the Mode-1 Right Hand Throttle and Left Hand Elevator version. If you are not sure which model to get, most U.S. customers choose Mode 2, while in some foreign countries, Mode 1 is more standard. Left-handed drivers may also prefer a Mode 1 radio.

Glitching and range impairment from motor, servo, ESC and mechanical RF “noise” will be a thing of the past. And no form of channel selection will be necessary on your part. Your DX6i selects the channel for you. When you fire up your DX6i, it searches for, selects and locks onto clear channels. (There are 80 channels in the 2.4GHz band.) And because international regulation of the band is very strict, your radio will neither sustain interference from – nor cause interference to – any other 2.4GHz device worldwide. And that applies, of course, to its simultaneous operation near other 2.4GHz RC radios as well. DX6i frequencies are so much higher than those of conventional RC channels that you radio won’t even recognize the existence of 27,50, 72 or 75MHz RC signals. Nor will conventional RC receivers “hear” your DX6i transmissions.In short, 2.4GHz DSM RC is a win-win deal for everyone!

The 6-channel DX6i uses the same full-range DSMX technology found in the Spektrum DX8 and includes an impressive list of programming features for both airplanes and helicopters that are simple to access and use. You can choose to purchase the AR6210 DSMX 6-channel receiver that is robust enough to use in large models yet compact enough to fit in many parkflyers. The DX6i is also compatible with all existing Spektrum aircraft receivers. Whatever kind of flying you do, the DX6i can be adapted to most any model in your existing collection that requires 6-channels or less.

The tiny receiver with big-time performance.
The DX6i transmitter package comes with the new AR6210 receiver, which is specifically designed for small, very light size. Better yet, it’ll deliver reliable range exceeding that of any other receiver you'll find! ATTENTION Robot Builders - Many competitions require a receiver to failsafe on all channels. The new AR610 meets this requirement.

This advanced radio features:
- Full range 2.4GHz DSM2 6-channel radio
- 10-model memory
- ModelMatch
- ServoSync
- Roller/selector user interface
- Attractive and ergonomic design
- Proven DSMX technology
- Rudder dual-rate
- Large LCD display
- Integrated timer
- Contrast Adjustment
- Dual-speed trim scroll
- Model name and type
- Throttle cut
- Trainer Mode
- Model Copy
- Travel adjustment
- Sub-trim
- Servo monitor
- Dual rate and exponential
- Compatible with any existing DSM, DSM2 and DSMX receivers
- Airplane Programing Features: Flaps, P-mixes, Dual aileron, V-tail, Delta, Differential
- Heli Programming Features: Gyro adjust, Graphic throttle curve, Graphic pitch curve, P-mixes, Revo mix, Swash type (Normal, and CCPM 120)
- Adjustable stick length
- Direct trim access display

DX6i Software Features:
The DX6i comes equipped with all the programming features you need to fly most any sport, 3D or pattern airplane. It also includes helicopter programming.

General
- Integrated Timer
- Dual Rate and Expo
- Dual Speed Trim Scroll
- Model Name
- Model Type
- Throttle Cut
- Trainer Mode
- Model Copy
- Travel Adjust
- Sub Trim
- Servo Monitor

Airplane
- Flap
- P-Mixes (2)
- Flap-Elevator Mix
- Dual Aileron Mix
- V-tail Mix
- Delta Mix
- Aileron Differential

Helicopter
- Gyro Adjust
- Graphic Throttle Curve
- Graphic Pitch Curve
- P-Mixes (2)
- Revo
- Swash Type: Normal, 120-deg CCPM

view in full site