Designed by world aerobatic champion Quique Somenzini, the F-27Q Stryker delivers a thrilling blend of speed and aerobatic precision that's unlike anything else in its class. Its fiberglass-reinforced Z-Foam airframe has been designed to handle abrupt wing loading changes at high speeds. This, combined with its more powerful 480 brushless power system and twin rudders, gives you an extra dimension of aerobatic fun you won't find with any other flight-ready flying wing. Flat spins, blenders, snaps, knife edge - the F-27Q does it all with the same smooth, predictable handing that's made every Stryker a sport flying favorite.
Features
Fully functioning rudders allow for more advanced maneuvers
Redesigned airfoil and more powerful 480 Brushless Outrunner motor for improved aerodynamics and speed
More rigid airframe with fiberglass reinforcement reduces wing flex and increases precision and speed
Removable top hatch provides convenient access to internal electronic components
Easy release magnetic nose for increased durability
Z-foam construction with CA hinges for increased durability, repairability and safety at high speeds
| Specs |
| Wingspan |
37.1 in. (943mm) |
| Overall Length |
24.1 in. (612mm) |
| Flying Weight |
30 oz (855g) |
| Motor Size |
480 size Brushless Outrunner 2200Kv |
| Radio |
4-channel radio system minimum |
| Servos |
Four DSV130M digital metal geared servos |
| Trim Scheme Colors |
White with black, yellow, red, and blue |
| Center of Gravity |
5.5 in. (140mm) forward from the firewall on fuselage |
| Prop Size |
6" x 6" |
| Speed Control |
40A (installed) |
| Recommended Battery |
2200mAh 11.1V 3S 25C LiPo Battery |
| Control Throw (Aileron) |
Low Rate: 17mm, 10% expo
High Rate: 35-40mm, 50% expo |
| Control Throw (Elevator) |
Low Rate: 13mm, 5% expo
High Rate: 35-40mm, 50% expo |
| Control Throw (Rudder) |
35-40mm, 5% expo for both Low and High rates |
| Approximate Flying Time |
8-12 minutes |
| Charger |
DC powered variable rate balancing charger (included) |
| Recommended Environment |
Outdoors |
| Assembly Required? |
No |
Needed to Complete
A 4+ channel transmitter and receiver radio system
3S 11.1V 2200mAh 25C Li-Po battery
Compatible Li-Po Charger
|
