Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe, the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps!
Features
For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries
Includes built-in balancer for up to 6S packs
Fast charge up to 8 amps
Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included)
0.1-8.0A adjustable charge current
Precision peak detection with adjustable sensitivity for NiCd and NiMH batteries
Constant current/constant voltage charge method for Pb and lithiums
Temperature sensing capabilities (Thermal Probe available separately)
Top-off charge feature fully charges NiMHs without overheating
0.1-3.0A adjustable discharge current
Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and lithiums
Perform 1 to 10 cycles (NiCd/MH only), and recall all data
Configure up to 10 batteries in memory for instant, easy recall and charger set-up
Banana plugs on DC input, and includes mating alligator clips
Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages
Audible sound cues aid in programming and notification of function changes.
Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output
Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection
Specs |
AC Input Voltage |
110V 60Hz -- 240V 50Hz |
DC Input |
11-15.0V, banana plugs with mating gator clips |
Number of Outputs |
One |
Number of Cells |
1-24 NiCad/NiMH
1-6 Lipo/LiIon/LiFe
6, 12, 24V Pb |
Fast Charge Current |
0.1-8.0A linear NiCad/NiMH, auto mode
0.1-8.0A for Lithiums and Pb |
Fast Charge Termination |
Peak detection for NiCad/NiMH
CC/CV for Pb and Lithiums
Optional thermal cutoff for all battery types |
Fast Charge Safety Timer |
0-990 minutes |
Discharge Current |
0.1-3.0A |
Discharge Cutoff Voltage |
0.5-1.2V per cell NiCd/NiMH
2.8V per cell LiPo/Li-Ion
2.5V per cell LiFe
1.8V per cell Pb |
Battery Memories |
Ten |
Programming Controls |
Dial, 2 Pushbuttons |
Display Type |
2x16 LCD with backlight and adjustable angle |
Audible Indicators |
10 melodies, on/off |
Case Material |
Aluminum and ABS plastic |
Thermal Cutoff |
50-150¡F (10-65¡C) |
Safety Devices |
Solid-state Overload |
Cooling Fan |
Built-in |
Case Size |
7.2 x 7.0 x 2.4in. |
Weight |
39.4 oz. |
NiCad/NiMH Specs |
Trickle Current |
0-330mA |
Peak Sensitivity |
5-20mV NiCad; 3-15mV NiMH |
Peak Delay at Start |
0-60 minutes |
Cycle Count |
1-10 cycles |
Cycle Delay |
0-60 minutes |
Maximum Charge Cap |
0-9900mAh |
NiMH Top Off Charge |
0-1000mAh |
Lithium Specs |
Balancing Accuracy |
5mV per cell |
Balancing Connector |
FlightPower and ElectriFly adapters included |
Maximum Node Current |
300mAh |
|