Stock Status: Available

Ready to take robotics to the next level? MINDS-i now offers the new Arduino Module kit designed for the 4x4 and 6x6 chassis. With just a few connectors put this on your MINDS-i kit and program it. Autonomous Navigation is made easy with MINDS-i and the Arduino Uno. The set includes easy to use visual instructions with "Quick Start" Programing guide.

Program your MINDS-I kit with the Arduino Uno, a micro controller based on the Atmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Plug the Sensor Shield on the top of your Arduino to make it easy to connect your digital and analog sensors, ESC, Servos, and ultrasonic sensors. This is great for use in the classroom. Breaks out the 13 digital ports and 6 analog ports to easy to connect Voltage, Ground, and Signal. The shield also includes I2C and Serial connectors.

Features
Microcontroller ATmega328 Operating Voltage 5V
Input Voltage (recommended) 7-12V; Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz

Includes
Arduino Uno
Sensor Shield V5
USB cable
Mounting plate
Protective Cover
3 Parallax Ping sensors
2 IR Distance Sensors
Arduino Referance Guide
All necissary hardware and cables