Their great performance and small size make them perfect for small 3D and other park flyer models. The external rotor design eliminates the need for a gearbox, saving you valuable weight to get the perfect performance out of the model.
| Type |
Brushless Outrunner |
| Size |
Replacement for 370 or 400 |
| Bearins or Brushings |
Ball Bearings |
| Recommended Prop Range |
9x7 to 11x4.7 |
| Voltage |
7.2-12V |
| RPM/Volt (Kv) |
920 |
| Resistance |
0.10 ohms |
| Idle Current |
0.70 at 10V |
| Shaft Diameter |
0.125 in (3.17mm) |
| Overall Length |
1.15 (29mm) |
| Weight |
56g (2.0 oz) |
| Overall Diameter |
1.10 in (28mm) |
| Diameter |
1.10 in (28mm) |
| Continuous Current |
10A |
| Maximum Burst Current |
13A |
| Cells |
2-3 LiPoly or 6-10 NiCad/NiMh |
| Speed Control |
10-20A Brushless ESC |
Needed to Complete
| 10-20A Brushless ESC |
| 9x7 - 11x4.7 Prop |
| 2S - 3S 860-1320mAh LiPoly Battery |
|
