Rated for 4S maximum input, and suitable for use with stock gearing on AWD (all wheel drive) vehicles in basher applications; not recommended for 2WD vehicles. The Switching BEC provides power for servo and receiver all the way to 6S. Profiles can be custom designed on a PC with the included Castle Link PC programming software.
Features
Infinitely adjustable throttle and brake curves with timing advance
Punch Control allows dialing in horsepower where needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smooth launches
Four pole motor
Replaces 550 size motors
Powerful 2400kV motor
Specs
Electronic Speed Control
Cells: 6-12 NiCd/NiMH, 2-6 cell LiPo
Brake: Proportional
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 45.5mm x 36.5 x 21.5mm (1.79"x1.44"x0.85")
Weight: 81g (2.8oz)
2400 kV Motor
Input Voltage: Max of 5S LiPo (14.8V) or 14 cell NiCd/NiMH (16.8V)
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Weight: 10.6oz (301.5g)
Shaft Diameter: 1/8" (3.715mm)
Connector Type: 4mm bullet type connector
Motor Wire Length: 4" leads (101mm)
|
